|
Scale |
LIP 6001 |
|
Measuring standard* Coefficient of linear expansion |
OPTODUR phase grating on Zerodur glass ceramic; grating period 8 µm αtherm = (0±0.1) x 10–6 K–1 (Zerodur glass ceramic) αtherm ≈ 8 x 10–6 K–1 (glass) |
|
Accuracy grade* |
±1 µm (only for Zerodur glass ceramic up to measuring length 1020 mm); ±3 µm |
|
Baseline error |
≤ ±0.175 µm/5 mm |
|
Measuring length ML* in mm |
20 30 50 70 120 170 220 270 320 370 420 470 520 570 |
|
Reference mark |
One at midpoint of measuring length |
|
Mass |
1.1 g + 0.11 g/mm measuring length |
|
Scanning head |
LIP 608 |
LIP 607 |
||||||
|
Interface |
1 VPP |
TTL1) |
||||||
|
Integrated interpolation* |
– 4 µm |
5-fold 0.8 µm |
10-fold 0.4 µm |
25-fold 0.16 µm |
50-fold 0.08 µm |
100-fold 0.04 µm |
500-fold 0.008 µm |
|
|
Cutoff frequency –3 dB |
≥ 1 MHz |
|||||||
|
Scanning frequency |
– |
– – ≤ 312.5 kHz |
– ≤ 312.5 kHz ≤ 156.25 kHz |
≤ 250 kHz ≤ 125 kHz ≤ 62.5 kHz |
≤ 125 kHz ≤ 62.5 kHz ≤ 31.25 kHz |
≤ 62.5 kHz ≤ 31.25 kHz ≤ 15.63 kHz |
≤ 12.5 kHz ≤ 6.25 kHz ≤ 3.13 kHz |
|
|
Edge separation a |
– |
– – ≥ 0.135 µs |
– ≥ 0.07 µs ≥ 0.135 µs |
≥ 0.03 µs ≥ 0.07 µs ≥ 0.135 µs |
||||
|
Traversing speed2) |
≤ 240 m/min |
-- – ≤ 75 m/min |
– ≤ 75 m/min ≤ 37 m/min |
≤ 60 m/min ≤ 30 m/min ≤ 15 m/min |
≤ 30 m/min ≤ 15 m/min ≤ 7.5 m/min |
≤ 15 m/min ≤ 7.5 m/min ≤ 3.7 m/min |
≤ 3 m/min ≤ 1.5 m/min ≤ 0.75 m/min |
|
|
Interpolation error Position noise RMS |
±4 nm 0.4 nm (1 MHZ3)) |
– |
||||||
|
Electrical connection* |
Cable outlet on the left/right and straight/angled 1 VPP: Cable, 0.5 m, 1 m, or 3 m, D-sub connector (male) 15-pin TTL: Cable, 0.5 m or 1 m, with 15-pin D-sub connector (male) |
|||||||
|
Cable length |
With HEIDENHAIN cable: Homing, limit: ≤ 10 m; only incremental: ≤ 20 m; |
|||||||
|
Voltage supply |
DC 5 V ±0.5 V |
|||||||
|
Current consumption |
≤ 150 mA |
≤ 250 mA (without load) |
||||||
|
Vibration 55 Hz to 2000 Hz Shock 6 ms |
≤ 500 m/s2 (IEC 60 068-2-6) ≤ 1000 m/s2 (IEC 60 068-2-27) |
|||||||
|
Operating temperature |
–10 °C to 70 °C |
|||||||
|
Mass |
Scanning head Connector Connecting cable |
≈ 5 g (without cable) AK LIP 608 ≈ 71 g; AK LIP 607 ≈ 74 g ≈ 22 g/m |
||||||
|
* Please select when ordering |
2) Maximale Maximum traversing speed for referencing: 16.8 m/min (70 kHz) 3) –3dB cutoff frequency of the subsequent electronics |
|||||||